PortalHomeCalendarGalleryChat RoomRoad Burner GameNew PostsSearchFAQRegisterLog in

Share | 
 

 Inertia Motorsports '08 Price List

View previous topic View next topic Go down 
AuthorMessage
JarZ
VIP
VIP


Number of posts : 6
Location : Newark, NJ
Vehicle : 2005 Dodge Magnum R/T HEMI
Registration date : 2008-02-26

PostSubject: Inertia Motorsports '08 Price List   Fri Feb 29, 2008 12:34 pm

Hey everyone. The new price list for Inertia Motorsports is in effect.


Per Stu: OK, my web site is up now and I'm adding products but I thought I put a price list out with what I currently have down. This isn't everything but it's most of it. Please chime in if you have any questions. I raised a few prices and lowered some others primarily rotating assemblies. Also, we have allot of engine options that aren't covered here but this will give you a pretty good idea.



$1495 - CNC Ported, hand blended 5.7 heads with exchange, includes 6.1 exhaust springs and new viton valve seals.



$1920 - Big valve, CNC ported, hand blended 5.7 heads with exchange, 2.02/1.57 dia valves, chrome molly retainers and single grove locks. Valve guides are honed to set clearance to new specs, comes with 6.1 exhaust springs and new viton seals.



$1595 - CNC Ported, hand blended 6.1 heads with exchange, stock valves, includes new viton valve seals.



$2025 - CNC Ported, hand blended 6.1 heads with 2.10/1.60 valves, chrome molly retainers and single grove locks. Valve guides are honed to set clearance to new specs, new viton seals.



$2195 - CNC Ported, hand blended 6.1 heads with 2.10/1.625 valves, chrome molly retainers and single grove locks. Valve guides are honed to set clearance to new specs, new viton seals.



$250 - upgrade to Ti retainers (note this price may change with Ti pricing due to war demand)



$100 - Spring locators for Comp, PAC, Manley or Crower springs



$25 - Valve seals for use on cam lifts over 0.570"



$275 - PAC 1220 intake spring upgrade on 6.1 heads, uses Crower spring on exhaust side, (above locators and seals required with these springs) will handle valve lifts of up to 0.635 intake and 0.610 on exhaust side.



$325 - PAC 1520 intake spring upgrade on 6.1 heads, uses Manley spring on exhaust side, (above locators and seals required with these springs) will handle valve lifts of up to 0.635 intake and 0.610 on exhaust side.



$225 - Manley spring upgrade on 5.7 heads (Also, requires spring locators and seals above)



$175 - Crower spring upgrade on 5.7 heads (also, requires spring locators and seals above)



$325 - Coated cyl head chambers and valve faces with ceramic thermal barrier coating



$225 - Coat valve stems with molly disulfide dry film lubricant.



$375 - Camshafts, custom or standard



$3350 - 370/5.7 ballanced rotating assembly (outright)



$4995 - 370/5.7 short block with core exchange on block



$3495 - 383/5.7 ballanced rotating assembly



$5195 - 383/5.7 short block with core exchange on block



$3695 - 392 or 407/5.7 ballanced rotating assembly



$5595 - 392 or 407/5.7 short block with core exchange on block



$3495 - 392/6.1 ballanced rotating assembly



$4995 - 392/6.1 short block with core exchange on block



$3795 - 418-426 ballanced rotating assembly



$5795 - 418-426 short block with core exchange on block



Note since we use custom CP pistons with all our rotating assemblies and short blocks we can provide pistons for any desired compression ratio, ring package, wrist pin size and bore desired at no additional cost. Additionally, I can adjust compression heights for stroke lengths not shown above such as stock stroke all forged settups or destroked engines.



Engine upgrades:



$125 - 9310 tool steel wrist pins

$125 - WPC surface wrist pins (required with unbushed rods)

$750 - Upgrade stroker kits to Manley Pro I beam lightweight rods

$850 - Upgrade stroker kits to Crower 93 series rods

$155 - ARP main studs

$350 - ARP head studs

$175 - Coated piston skirts

$175 - Ceramic thermal barrier coated piston crowns

$550 - Partial crank profile 370, 383, 392/6.1 engines

$1250 - full crank profile 370, 383, 392/6.1 engines

$450 - Ported 6.1 intake manifold

$175 - Coat inside of intake with ceramic thermal barrier coating

$175 - Coat outside of intake with thermal dispersant coating

$425 - 6.1 intake on truck conversion kit



Please feel free to call Stu with any questions 512-964-7724



Thanks,



Jacob
__________________
Back to top Go down
View user profile
 
Inertia Motorsports '08 Price List
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Razzle Dazzle Mobile Car Valeting (full price list added)
» SOLD: Kidd Beretta
» Purchasing Oil from Gulf Western Oil
» SUZUKI Genuine Parts
» For sale: Spyder helmet

Permissions in this forum:You cannot reply to topics in this forum
Muscle Car Domain :: VIP Parking :: Inertia Motorsports-
Jump to: